Brief
You share the target weight, width, composition and end use; we propose the machine, gauge and yarn combination.
Knitted fabric production
Selanik Knitted Fabric
Tuck stitches add volume; double-faced and warm double-bed structure. The tuck layout leaves air pockets inside the fabric, so the cross-section becomes full and soft without a disproportionate gain in weight.
Structure and production
Its sweater-like character and warmth bring it forward in autumn and winter collections. It is used in pullovers, cardigans, light outerwear and layered looks, and acrylic or viscose blends open up more economical or softer alternatives.
Tutku Fabric sources this knit with its production partners and brings colour fastness to the front in this group. Rubbing fastness is requested for dark tones, light fastness for pieces expected to stay on the rail, and bleeding behaviour in washing for qualities that will sit next to pale grounds. Results are reported, and tones that stay below the expected level are worked again.
Sourcing and sampling
One team from sample to bulk.
We knit Selanik on our own circular knitting machines in Kahramanmaraş and follow it from sample to bulk with one team.
Sample
We knit the sample on our own machine park in Kahramanmaraş and report greige and finished weight with post-wash dimensions.
Approval and recipe
Machine, settings and yarn lot of the approved sample go into the recipe; bulk is planned on that recipe.
Production and dispatch
Light-table inspection at the knitting exit, weight and width measured per lot; approved quality ships with traceable lot data.
FAQ
Questions about Selanik.
What weight and width is Selanik produced in?
Our standard weight band is 250–420 g/m²; width: Açık en 150–180 cm. Values outside the band are developed on request; the target is confirmed on the sample with post-wash measurements before bulk is planned.
Which products is Selanik used for?
Typical end uses are kazak, hırka, dış giyim. Composition options include pamuk, akrilik, viskon karışımları; we recommend the yarn and finish according to the product and washing expectations.
How do both faces of a double-bed fabric stay even?
Cylinder and dial stitch lengths are balanced on the sample; an unbalanced setting causes lines or uneven shrinkage on one face. Since a single faulty needle leaves a line along the whole roll, a trial knit and light-table inspection are done for every lot.
Related guides
Read before you order.
How the construction, machine settings and weight of this fabric come together.
How a circular knitting machine works: diameter and gauge
A circular knitting machine forms loops around a cylindrical needle bed. We explain what diameter and gauge mean and how they shape fabric width and hand feel.
Read more →
Single jersey, interlock, rib and piqué: which fabric for which product?
The differences, stretch behaviour and typical weight ranges of four core knitted constructions, and which product each one suits.
Read more →
Weight, width and shrinkage: what to know before buying
Weight, width and shrinkage decide both the cost of a knit and how the garment behaves after washing. We explain how they are measured and what to settle before ordering.
Read more →Related fabrics
Neighbouring constructions.
Custom development
Need a different weight or composition?
Share your target for Selanik; we will knit the closest construction on our own machines and report the measurements.
Start a project ↗